Torque Converter Shop

PATC Performance Torque Converters

We have triple clutch converters for the Ford Power Stroke Diesel, Allison 1000 and Dodge Cummins Diesel. Check out our billet torque converters for 700R4, 4L60E, 200-4R, 4L80E, 6L80E, TH400, 4R70W, 4R100 and 48RE transmissions. We have developed a full line of billet torque converters with lock-up for General Motors, Ford, and Dodge transmissions for applications ranging from improved factory performance to all out competition.

We can also build custom stall speed converters as well if the one you need is not listed. Email Kerry@torqueconvertershop.com

ALL OUR TORQUE CONVERTERS ARE

MADE IN THE U.S.A.

  

700R4 2004R Torque Converter

torque converter 700r4 2004rtorque converter 700r4 2004r

#2." Super Street Raptor torque converter " Fits 700R4, 200-4R and non-LS1 4L60E transmissions (1982-1997). This stall converter is balanced, has furnace brazed fins, bearing construction and a wider carbon fiber clutch. This converter can be ordered with stall speeds of 2000, 2300, 2600 or 2800 RPM.  Can also be ordered with a stall speed of 1800 RPM for towing, 4WD and stock motors. We now have this converter in a 1200 RPM stall speed for diesels. Rated up to 450 horse power. No Nitrous, buy #2X if you have Nitrous. Cost $295.00.

Note: All 2004R's are 27 spline. 700R4's 1982-83 are 27 spline, 1984 could be either way 27 or 30 spline, 1985 and up are 30 spline. Also note that the proper spline to count is the small input shaft as the larger shaft is the stator shaft and all of those are 27 spline, so be sure to count the smaller diameter shaft.

spline count
Stall Speed

 

Torque converter for C4 C6 AOD 4R70W 4R100

Torque Converter for 727 904 518 46RH 46RE 618 47RH 47RE 48RE 545RFE 68RFE

Dodge Cummins Conversion swap Torque Converters

Dodge Cummins Torque Converters