Torque Converter Shop

PATC Performance Torque Converters

We have triple clutch converters for the Ford Power Stroke Diesel, Allison 1000 and Dodge Cummins Diesel. Check out our billet torque converters for 700R4, 4L60E, LS1, 200-4R, 4L80E, 6L80E, TH400, 4R70W, 4R100 and 48RE transmissions. We have developed a full line of billet torque converters with lock-up for General Motors, Ford, and Dodge transmissions for applications ranging from improved factory performance to all out competition.

We can also build custom stall speed converters as well if the one you need is not listed. Email Kerry@torqueconvertershop.com

ALL OUR TORQUE CONVERTERS ARE

MADE IN THE U.S.A.

  


Torque converter for Allison 700R4 4L60E 2004R TH350 TH400 4L80E 6L80E

Torque converter for C4 C6 AOD 4R70W 4R100

Torque Converter for 727 904 518 46RH 46RE 618 47RH 47RE 48RE 545RFE 68RFE

Dodge Cummins Conversion swap Torque Converters

Dodge Cummins Torque Converters

Billet Torque Converters

2004R GM and Chevy Performance Torque Converters

torque converter 700r4 2004r

#1.   " Street Raptor torque converter " Fits 700R4, 200-4R and early 4L60E transmissions (1982-1997). This Performance/heavy duty balanced torque converter has furnace brazed fins and added strength. If you have a problem with your fins coming loose this is the way to go. This Performance torque converter stalls at 2200 to 2500 RPM and gives a faster launch than a stock torque converter. Also comes in 1700 and 2000 stall speeds. Rated up to 350 horse power. Furnace brazing laminates the complete turbine shell. This effectively makes your torque converter one piece, leaving no weak links in your converter to cause a converter failure. Cost $175.00

Note: All 2004R's are 27 spline. 700R4's 1982-83 are 27 spline, 1984 could be either way 27 or 30 spline, 1985 and up are 30 spline. Also note that the proper spline to count is the small input shaft as the larger shaft is the stator shaft and all of those are 27 spline, so be sure to count the smaller diameter shaft.

spline count
Stall Speed
Wider Carbon Fiber Clutch
 

torque converter 700r4 2004rtorque converter 700r4 2004r

#2." Super Street Raptor torque converter" Fits 700R4, 200-4R and non-LS1 4L60E transmissions (1982-1997). This stall converter is balanced, has furnace brazed fins, bearing construction and a wider carbon fiber clutch. This converter can be ordered with stall speeds of 2000, 2300, 2600 or 2800 RPM.  Can also be ordered with a stall speed of 1800 RPM for towing, 4WD and stock motors. We now have this converter in a 1200 RPM stall speed for diesels. Rated up to 450 horse power. No Nitrous, buy #2X if you have Nitrous. Cost $295.00.

Note: All 2004R's are 27 spline. 700R4's 1982-83 are 27 spline, 1984 could be either way 27 or 30 spline, 1985 and up are 30 spline. Also note that the proper spline to count is the small input shaft as the larger shaft is the stator shaft and all of those are 27 spline, so be sure to count the smaller diameter shaft.

spline count
Stall Speed

#2X. Super street raptor torque converter 700r4 2004rSame torque converter as above with a balloon plate, rated up to 550 horse power. This lock-up torque converter can be ordered with stall speeds of 1200 to 2800 RPM. Can be used with Nitrous. Fits 700R4, 200-4R and non-LS1 4L60E transmissions (1982-1997).Cost $399.00

Note: All 2004R's are 27 spline. 700R4's 1982-83 are 27 spline, 1984 could be either way 27 or 30 spline, 1985 and up are 30 spline. Also note that the proper spline to count is the small input shaft as the larger shaft is the stator shaft and all of those are 27 spline, so be sure to count the smaller diameter shaft.

spline count
Stall Speed

#5X. Power Raptor Lock-up torque converter 700r4 2004r. Fits 700R4, 200-4R and non-LS1 4L60E transmissions. This is a 10 inch torque converter with a 12 inch lock-up carbon fiber clutch rated up to 700 horse power. Can be ordered in stall speeds of 2000 to 4000 RPM. We stock 2000, 2600, 2800, 3000 and 3200. Lower 60 foot times and improved quarter mile times, an average of 1/2 second reduction! This torque converter has a torque multiplication rate of 2.5. The Ultimate Top of the Line Lock-Up Converter. Cost $585.00.

                           

torque converter 700r4 2004r

           

 

Note: All 2004R's are 27 spline. 700R4's 1982-83 are 27 spline, 1984 could be either way 27 or 30 spline, 1985 and up are 30 spline. Also note that the proper spline to count is the small input shaft as the larger shaft is the stator shaft and all of those are 27 spline, so be sure to count the smaller diameter shaft.

spline count
Stall Speed

#MR-1.  MegaRaptor-1 Torque Converter 700R4 2004R 4L60. Performance gains of 2/10 of a second in 60 feet and up to 3/4 of a second in the quarter mile have been reported. The torque multiplication rates can be ordered in 2 to 1, 2.5 to 1 or 3 to 1. The torque multiplication of this converter will deliver an increase of up to 50 horse power to the rear wheels. The MegaRaptor-1 with its carbon fiber clutch will withstand power levels of 700 horse power. This 10 inch converter can be ordered with stall speeds of 2000 to 5500 RPM. The Ultimate Top of the Line Single Clutch Lock-Up Converter. Fits 700R4, 200-4R and early style 4L60E transmissions. Cost $599.00

10 inch torque converter 700r4 2004r 4L60E

Note: All 2004R's are 27 spline. 700R4's 1982-83 are 27 spline, 1984 could be either way 27 or 30 spline, 1985 and up are 30 spline. Also note that the proper spline to count is the small input shaft as the larger shaft is the stator shaft and all of those are 27 spline, so be sure to count the smaller diameter shaft.

spline count
Stall Speed

 

If you have question please email Kerry@torqueconvertershop.com

 

  

Also check out our other site for Manual transmission parts, LT1 and LS1 type fuel rail covers, flywheels, Cummings flexplates, and more. www.americanhotrodsolutions.com www.manualtransmissionkits.com

Go to www.626pucks.com for CB and Ham antenna mounts and accessories